Appendix-1 Parameter List Appendix * 2nd control is displayed when '08 (2nd control)' is allocated to one of multi-function inputs from C001 to C006. App-8 Parameter No. Function name Monitor or data range (Digital Operator) Default setting Changes during operation Unit Set value RUN mode, Acceleration/Deceleration functions A092 Acceleration time 2 0.01 to 99.99 100.0 to 999.9 1000. to 3000. 15.00 Yes s A292 *2nd acceleration time 2 15.00 A093 Deceleration time 2 0.01 to 99.99 100.0 to 999.9 1000. to 3000. 15.00 Yes s A293 *2nd deceleration time 2 15.00 A094 2-step acceleration/ deceleration selection 00: Switched via multi-function input 09 (2CH) 01:
Switched by setting 00 No A294 *2nd 2-step acceleration/ deceleration selection 00 A095 2-step acceleration frequency 0.0 to 400.0 0.0 No Hz A295 *2nd 2-step acceleration frequency 0.0 A096 2-step deceleration frequency 0.0 to 400.0 0.0 No Hz A296 *2nd 2-step deceleration frequency 0.0 A097 Acceleration pattern selection 00: Line 01: S-shape curve 00 No A098 Deceleration pattern selection 00: Line 01: S-shape curve 00 No External frequency adjustment A101 FI start frequency 0.0 to 400.0 0.0 No Hz A102 FI end frequency 0.0 to 400.0 0.0 No Hz A103 FI start ratio 0. to 100. 0. No % A104 FI end ratio 0. to 100. 100. No % A105 FI start selection 00: Use FI start frequency [A101] 01:
0 Hz start 01 No