Appendix-1 Parameter List Appendix * 2nd control is displayed when '08 (2nd control)' is allocated to one of multi-function inputs from C001 to C006. App-14 Parameter No. Function name Monitor or data range (Digital Operator) Default setting Changes during operation Unit Set value Communication function adjustment C071 Communication speed selection (Baud rate selection) 04: 4800 bps 05: 9600 bps 06: 19200 bps 04 No C072 Communication station No. selection 1. to 32. 1. No C074 Communication parity selection 00: No parity 01: Even 02: Odd 00 No C075 Communication stop bit selection 1: 1 bit 2: 2 bits 1 No C076 Communication error selection 00: Trip 01: Trip after deceleration stop 02:
Ignore 03: Free run 04: Deceleration stop 02 No C077 Communication error timeout 0.00 to 99.99 0.00 No s C078 Communication wait time 0. to 1000. 0 No ms Various adjustment C081 FV adjustment 0.0 to 200.0 100.0 Yes % C082 FI adjustment 0.0 to 200.0 100.0 Yes % C085 Thermistor adjustment 0.0 to 200.0 (For the external thermistor gain adjustment) 100.0 Yes % C086 AM offset adjustment 0.0 to 10.0 0.0 Yes V