4-2 Function Mode Multi-function Output Terminal Selection •You can allocate the following functions to any of multi-function output terminals P1 to P5 (C021 to C025) or the alarm relay output terminal (C026). •Multi-function output terminals P1 to P5 provide open-collector output. The alarm relay output terminal provides relay output. •You can select NO- or NC-contact output for each output terminal with C031 to C035, or C036. •If alarm code output is selected in C062 (refer to page 4-97), alarm code output (AC0 to AC3) is provided via output terminals P1 to P3 (for 3-bit code), or via output terminals P1 to P4 (for 4-bit code). The C021 to C025 settings are disabled.
4 Functions 4-91 Data Description Reference item Page 00 RUN: Signal during RUN Signal during RUN 4-94 01 FA1: Constant speed arrival signal Frequency arrival signal 4-94 02 FA2: Over set frequency arrival signal 03 OL: Overload warning Overload limit/Overload warning 4-49 04 OD: Excessive PID deviation PID function 4-31 05 AL: Alarm output 06 FA3: Set-frequency-only arrival signal Frequency arrival signal 4-94 07 OTQ: Overtorque Overtorque 4-96 08 IP: Signal during momentary power interruption Momentary power interruption/Undervoltage 4-44 09 UV: Signal during undervoltage 10 TRQ: Torque limit Torque limit function 4-56 11 RNT: RUN time over RUN time over 4-51 12 ONT:
Power ON time over Power ON time over 4-51 13 THM: Thermal warning Electronic thermal function 4-46 19 BRK: Brake release Brake control function 4-72 20 BER: Brake error 21 ZS: 0-Hz signal 0-Hz detection signal 4-96 22 DSE: Excessive speed deviation V2 control mode selection 4-117 23 POK: Position ready Orientation function 4-125 24 FA4: Set frequency exceeded 2 Frequency arrival signal 4-94 25 FA5: Set frequency only 2 26 OL2: Overload warning 2 Overload limit/Overload warning 4-49 27 FVDc: Analog FV disconnection detection Window comparator function 4-63 28 FIDc: Analog FI disconnection detection 29 FEDc: Analog FE disconnection detection 31 FBV:
PID FB status output PID function 4-31 32 NDc: Network error Network error 4-99