i.2 General Safety underwater applications must first contact their OYMC representatives or the nearest OYMC sales office. This product has been manufactured under strict quality-control guidelines. However, if this product is to be installed in any location where failure of this product could involve or result in a life-and-death situation or loss of human life or in a facility where failure may cause a serious accident or physical injury, safety devices must be installed to minimize the likelihood of any accident. ◆ Quick Reference Run a Motor of One-Frame Larger Capacity When using this drive for variable torque loads such as fans and pumps, a motor one frame size larger can be used.
Refer to Drive Duty Mode Selection: C6-01 on page 130 The functions listed below affect the safe operation of the drive. Ensure that the settings fit the application requirements prior to operation. Know the Details of Safety Measures Operation of digital outputs during Auto-tuning. Rotational Auto-tuning allows for normal digital output operation, while non-rotational Auto-tuning does not allow for normal digital output operation. Safe operations. Run by power on. Parameter setting b1-17. LED operator stop key priority selection. Parameter o2-02. LOCAL/REMOTE key effective during stop in drive mode. Parameter o2-01. Enter press required after changing the keypad frequency reference.
Parameter o2-05. Operation interlock when program mode is selected. Parameter b1-08. 20 OYMC TOEP C71060622-01-OY V1000 User Manual Easily Set Application-Specific Parameters Preset parameter defaults are available for many applications. Refer to Application Presets on page 107 2WOR (CP %QPXG[QT