2 How to Modify the dm.config File to Change Camera and System Assignments System Components the box the cameras should now assign themselves addresses in the 192.168.254.x range. They are still receiving information about the network from outside in order to make this choice. You can simplify things still further by assigning each camera its own persistent IP address. When you install Visionscape, this folder is placed on your C: drive:
C:\Microscan\Vscape\Drivers\GigE\JAI\ Navigate to that folder and double-click on JAI SDK 1.4.0.exe or JAI SDK x64 Version 1.4.0.exe (depending on whether you’re running a 32-bit or 64-bit system) to install the JAI GigE Vision Persistent IP Configuration Tool . Once the tool is installed, navigate to Start Menu > All Programs > JAI SDK > Tools and click on Persistent IP Configuration Tool to open it. When you open the tool you will see a dialog similar to this: The camera here is set to use DHCP and its address is 192.168.254.3 . However, a persistent IP address is preferable. Visionscape GigE Camera Guide 2-59