B 98-000126-01 Visionscape GigE Camera Strobe/Trigger M8-4 to Pigtail 5M Cable Specifications 98-000126-01 Visionscape GigE Camera Strobe/Trigger M8-4 to Pigtail 5M The 98-000126-01 Visionscape GigE Camera Strobe/Trigger cable is a single-ended shielded cable with an M8 x 4 female connector on one end. Figure B–2 shows the wiring for the 98-000126-01 Visionscape GigE Camera Strobe/Trigger cable. FIGURE B–2. Visionscape GigE Camera Strobe/Trigger Cable Table B–3 describes the signals for the Visionscape GigE Camera Strobe/Trigger cable. TABLE B–3.
Visionscape GigE Camera Strobe/Trigger Cable Visionscape GigE Camera Guide B-3 Pin Signal Name Description 1 TrigIN+ External Trigger Input + 2 TrigIN- External Trigger Input - 3 Flash Flash Output 4 U (ext) User-Supplied Voltage for Flash Output: 5 to 30VDC (24VDC @ 16ma recommended)