The company has different models of instrument clusters, so display forms and items may vary. Reset service interval display item If the vehicle is not maintained by the qualified workshop after the expiration of an oil change maintenance or regular inspection maintenance, the Service Interval Display item can be reset as follows: The company's service interval is divided into two categories: oil replacement maintenance and regular inspection maintenance. Service interval display item displays the next maintenance infor- mation of the above two types of maintenance. Regular maintenance cycle and maintenance items can also be found in the maintenance man- ual.
Models equipped with analogue instrument clus- ter: – Switch off the ignition. According to driving time/mileage , the service interval of the vehicle is fixed. – Press and hold the button → page 13 on the instrument cluster. – Turn the ignition back on. Service interval prompt information If the next required maintenance is about to ex- pire, when turning on the ignition switch, the screen displays the maintenance prompt mes- sage . – If the instrument cluster displays one of the following information, release the button : Whether to reset oil change maintenance data? or reset the vehicle condition check data?
The number of miles or days shown is the maxi- mum distance and time that can be driven before the next maintenance. – Press the button 0.0 SET → page 13 on the in- strument cluster to confirm. Models equipped with digital instrument cluster (basic) : Maintenance project If a specified maintenance is due , after the igni- tion switch is turned on, the system will emit a signal tone, and the instrument cluster screen will display a wrench symbol for a few sec- onds. The display screen may also display one of the following text messages → Fig. 16 ; – The service interval display item can be reset through the service menu → page 16.
When the engine is running, the mainte- nance information displayed after a few seconds will be hidden, or by pressing the on the multifunction steering wheel for hidding the information → page 23. – Check your car condition immediately! – Oil change maintenance immediately! – Immediate oil change maintenance and vehicle condition Operating instrument cluster check! Check the service information When the ignition switch is on, the engine is off and the vehicle is stationary, you can inquire the current maintenance information: Introduction This chapter contains information on the follow- ing subjects: Models equipped with analogue instrument clus- ter:
– Menu in the instrument cluster 24 – Operation using the multifunction steering wheel 24 – Press the button on the instrument cluster until the service shows in the display. → page 14 – Release the button . The display displays the current maintenance information. Certain menu items can only be displayed when the vehicle is stationary. WARNING Models equipped with digital instrument cluster (basic) : Driver inattention can lead to accidents and in- juries. Operating a instrument cluster may in- terfere with a driver's observation of road con- ditions. 182.5C1.TRO.74 – Vehicle maintenance information can be quer- ied through the service menu → page 16. Driver information 23