WARNING Mechanically adjusting the front seat Do not leave lighters and other inflammable and explosive products on the moving track/ range of the electric seat. If the electric seat is squeezed into such items during the movement process, it may cause explosion or even fire and other accidents, seriously injuring drivers and passengers! Please refer to and at the start of the chapter on page 65. ● Do not place lighters and other flammable and explosive products in the car storage space, boxes or other objects on the surface, especially in summer, the high temperature in the car may cause the lighter to spontane- ously ignite.
WARNING Only seat covers and shrouds that are expressly permitted for the vehicle by us are permitted. The seat cover and guard should not block or press the electric seat adjustment mechanism; otherwise, the front seat may move unexpect- edly due to inadvertent misoperation of the electric seat adjustment during driving, which may result in vehicle loss of control and acci- dents resulting in injuries; It may also cause damage to the seat electric adjustment system due to the misoperation of the seat electric ad- justment mechanism for a long time. Fig. 55 On the left front seat: Operating element The following sections describe all possible ad- justment mechanisms.
The number of adjusting mechanisms depends on the seat model. NOTICE The right front seat adjusting mechanism is ar- ranged symmetrically with it. Sharp edges can damage the seat. ● Keep sharp objects away from the seat. Sharp objects, such as zippers, rivets or belts on clothing, can damage the surface of the seat. Open Velcro straps can also cause seat dam- age. Some front seats may be equipped with a com- bined mechanical/electric adjustment mecha- nism. Adjust sitting position Fig. 55 jump leads: 1 The lumbar support can be adjusted by oper- ating the rod. 2 Forward fold: Pull the rod and flip the seat backrest forward. To adjust the seat backrest:
relieve the pres- sure on the backrest and turn the handwheel. The seat backrest must be stuck in a vertical position. 3 The seat height can be adjusted by lifting or lowering the handle several times as re- quired. 4 Lift the rod while moving the front seat back and forth. The front seat must be locked af- ter releasing the tie rod. Owner's manual 66