The information in this user’s manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our website at www.supermicro.com. Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software and docu mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license. IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. Any disputes arising between the manufacturer and the customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product. FCC Statement:

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in industrial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”. WARNING: This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproduc Ɵv e harm. For more informa Ɵ on, go to www.P65Warnings.ca.gov. ! Manual Revision 1.0c Release Date: January 31, 2020 Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document.

Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2020 by Super Micro Computer, Inc. All rights reserved. Printed in the United States of America

Page 2

Preface Preface This manual is written for system integrators, IT professionals, and knowledgeable end-users. It provides information for the installation and use of the X10DRT-B+ motherboard. About This Motherboard The Super X10DRT-B+ motherboard supports dual Intel® E5-2600 (v3/v4) Series processors (Socket R3) that offer Intel® QPI (Intel QuickPath Interconnect) Technol ogy, providing point-to-point connections with a transfer speed of up to 9.6 GT/s. Built with the PCH C612, the X10DRT-B+ motherboard supports Intel® Manage ability Engine, Intel Rapid Storage Technology, Digital Media Interface (DMI), PCI-E Gen.

3.0 slots, DDR4 2400 MHz (max) memory, and a SIOM (PCI-E 3.0 x 16) net working slot. This motherboard is optimized for High Performance Computing, and is ideal for 2U Twin 2 systems. Please refer to our website (http://www.supermicro. com) for processor and memory support updates. Manual Organization Chapter 1 describes the features, specifications, and performance of the moth erboard. It also provides detailed information about the Intel PCH C612 chipset. Chapter 2 provides hardware installation instructions. Read this chapter when in stalling the processor, memory modules, and other hardware components into the system.

If you encounter any problems, see Chapter 3 , which describes trouble shooting procedures for video, memory, and system setup stored in the CMOS. Chapter 4 includes an introduction to BIOS, and provides detailed information on running the BIOS Setup utility. Appendix A lists software installation instructions . Appendix B contains UEFI BIOS Recovery instructions. iii

Page 3

X10DRT-B+ Motherboard User’s Manual Conventions Used in the Manual Pay special attention to the following symbols for proper system installation and to prevent damage done to the system or injury to yourself: Warning: Important information given to ensure proper system installation or to prevent damage to the components Note: Additional information given to differentiate between various models or provides information for proper system setup. iv

Page 4

Preface Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. Tel: +1 (408) 503-8000 San Jose, CA 95131 U.S.A. Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) Website: www.supermicro.com support@supermicro.com (Technical Support) Europe Address: Super Micro Computer B.V. Het Sterrenbeeld 28, 5215 ML 's-Hertogenbosch, The Netherlands Tel: +31 (0) 73-6400390 Fax: +31 (0) 73-6416525 Email: sales@supermicro.nl (General Information) support@supermicro.nl (Technical Support) rma@supermicro.nl (Customer Support) Website: www.supermicro.nl Asia-Pacific Address: Super Micro Computer, Inc. 3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235 Taiwan (R.O.C) Tel: +886-(2) 8226-3990 Fax: +886-(2) 8226-3992 Email: support@supermicro.com.tw Website: www.supermicro.com.tw v

Page 5