Care & Maintenance Cleaning the Smart High Torque Brush Bar Cleaning the Mini Electric Brush 1. Turn the lock counterclockwise until it stops, then remove the roller brush from the smart high torque brush bar. 3. After extended use, the roller brush may become dirty and should be washed. 1. Use a coin to turn the lock counterclockwise until you hear a click. 3. After washing, allow the roller brush to dry thoroughly by standing it upright in a well-ventilated area for at least 24 hours. ＞90° 4. After washing, allow the roller brush to dry thoroughly by standing it upright in a well-ventilated area for at least 24 hours. 2.
Use scissors to cut and pick out any hair or other debris tangled around the roller brush. Wipe away excess dust from the slot and clear plastic cover using a dry cloth or paper towel. 2. After unlocking the roller brush, remove it from the mini electric brush, then rinse and clean the roller brush. 4. Once the roller brush is dry, reinstall it by following the disassembly steps in reverse. 20 21