How to Use Setting Language Working Modes 2. Continuous Mode Press the button to enable Continuous Mode, then press the power button to turn the vacuum cleaner on. To exit Continuous Mode, press the button . Enabling the Continuous Mode allows the vacuum cleaner to run continuously without having to hold down the power button, which can help release your fingers. Using Different Accessories Press and hold the button for 3 seconds to open the language list, then press the button to scroll through the language to select the desired one. Press and hold the button for 2 seconds to use the selected language.
The vacuum cleaner has two working modes, you can select the desired one based on your cleaning needs. 2-in-1 Brush Nozzle: For vacuuming curtains, sofas, vehicle interiors, coffee tables, etc. 1. Non-continuous Mode Hold down the power button to start the vacuum cleaner, then release to stop it. Note: The display screen will go off if there is no operation for more than 10 seconds. Switching Suction Levels Press the button to switch suction levels of eco, standard/ auto, and high power. The corresponding suction level will be highlighted on the display screen. Mini Electric Brush: For vacuuming dirt, pet hair, and other stubborn debris from sofas, bedding, and other fabric surfaces.
Only when using the smart high torque brush bar, the auto mode will be activated and the notification of "Auto" will appear on the display screen. The vacuum cleaner will then automatically switch the suction level between the floor/tile and the carpet. Note: Stop the vacuum cleaner at any time while cleaning, it will continue to use the last selected suction level when started again. Non-continuous Mode Continuous Mode Notes: In Continuous Mode, the vacuum cleaner will enter into standby mode when pressing the power button, and resume running if pressing the button again.
When the vacuum cleaner keeps in standby mode for more than 10 seconds, its display screen will go off and the vacuum cleaner will then exit the Continuous Mode. Notes: If any rotating part becomes stuck, the vacuum cleaner may shut off automatically. Remove any trapped foreign objects, then resume use. When the motor runs overheated, the vacuum cleaner will automatically shut off. Wait until the battery temperature returns to normal, then resume use. 10 11