User's Guide Solving Problems ❏ Load one sheet of paper at a time when loading multiple sheets of paper. ❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is loaded in the paper source before you reload the paper. ❏ Load and eject paper without printing to clean the paper path. ❏ Make sure the paper size and paper type settings are correct.
Related Information & “Environmental Specifications” on page 152 & “Paper Handling Precautions” on page 31 & “Available Paper and Capacities” on page 32 & “Loading Paper in the Paper Cassette 1” on page 34 & “Loading Paper in the Paper Cassette 2” on page 37 & “Cleaning the Paper Path” on page 111 CD/DVD Tray is Ejected ❏ Make sure the disc is properly set on the tray and reinsert the tray correctly. ❏ Do not insert the CD/DVD tray until you are instructed to do so. Otherwise, an error occurs and the tray is ejected Related Information & “Loading a CD/DVD” on page 49 Power and Control Panel Problems Power Does Not Turn On ❏ Hold down the P button for a little longer.
❏ Make sure the power cord is securely plugged in. Lights Came On and then Went Out The printer's voltage may not match the outlet rating. Turn off the printer and unplug it immediately. Then check the label on the printer. ! Caution: If the voltage does not match, DO NOT PLUG YOUR PRINTER BACK IN. Contact your dealer. 134