User's Guide Menu Options for Setup Mode Menu Options for Basic Setup Select the menus on the control panel as described below. Setup > Basic Setup Language Select the display language. Menu Options for Network Settings Select the menus on the control panel as described below. Setup > Network Settings Network Status Displays or prints the network settings and connection status. Wi-Fi Setup See the Network Guide to make the following settings. ❏ Wi-Fi Setup Wizard Select a SSID, enter a password, and then connect the printer to a wireless (Wi-Fi) network. ❏ Push Button Setup (WPS) Connects the printer to a wireless (Wi-Fi) network by pressing a WPS push button on a wireless router.
❏ PIN Code Setup (WPS) In the wireless router utility, enter the PIN code displayed on the printer's screen to connect the printer to a wireless (Wi-Fi) network. ❏ Wi-Fi Auto Connect Connects the printer to a wireless (Wi-Fi) network using a computer that is connected to the access point. Insert the software disc supplied with the printer into the computer, and then follow the on- screen instructions. When you are prompted to operate the printer, run this menu. ❏ Disable Wi-Fi Disables the connection by turning off the wireless signal without deleting the network information. To enable the connection, set up the wireless (Wi-Fi) network again.
❏ Wi-Fi Direct Setup Connects the printer to a wireless (Wi-Fi) network without a wireless router. Manual Network Setup Changes the network settings, such as the printer name or TCP/IP. See the Network Guide for more details. Network Connection Check 115