Руководство по эксплуатации Delta DVP08ST11N (EN)

2006-11-23 http://www.delta.com.tw/industrialautomation/ 5011640301-8SE1 Switch-Type Digital Extension Module Instruction Sheet Warning 9 Please read this instruction carefully before use. 9 DVP08ST11N is an OPEN-TYPE device and therefore should be installed in an enclosure free of airborne dust, humidity, electric shock and vibration. The enclosure should prevent non-maintenance staff from operating the device (e.g. key or specific tools are required to open the enclosure) in case danger and damage on the device may occur. 9 DO NOT tough any terminal when the power is switched on. X Introduction 1. Thank you for choosing Delta DVP series programmable logic controller.

DVP08ST11N shall be used together with PLC SLIM TYPE PLC occupying 8 input points. Including MPU, the digital I/O can be extended to maximum 256 points. Besides, maximum 8 special extension modules (AD/DA/XA/PT/TC) are extendable from MPU. 2. No external power supply and signals are required, DVP08ST11N allows you to directly control its input points by its switches. 3. As digital switches, DVP08ST11N is able to input instructions without required external wiring for receiving signals. Besides, DVP08ST is handy and safe for using in teachings. ™ Nameplate Delta PLC model name Input power spec. 24Vdc 0.5W Barcode, Series No. MADE IN XXXXXX ™ Model Name and Series No. Production No.

Production week Production year (2005) Production plant (Taoyuan) Version No. Model name Y Product Profile & Outline DVP series Number of points Switch-type digital extension module No output module DC power input 1 DIN rail (35mm) 2 Extension unit/module connection port 3 Model name 1 4 Input indicator 5 DIN rail clip 2 6 Input switch 10 7 Fixing clip for extension unit 8 Nameplate Unit: mm 3.4 9 Extension unit/module connection port V Aiming pinhole for connection to MPU 1 3 6 9 90 5 3 7 ON 0 X0 4 1 XX 21 X3 2 XX 54 8 X6 3 X7 90 4 DVP-08ST 5 3 6 7 25.2 5.5 60 ON 0 1 2 3 4 VP-08ST 5 6

Стр. 1

Z Electrical Specifications [ How to Install 1. Use a screwdriver 2. Use the to open the side cover and reveal screwdriver to lift and unfasten the the connecting fixing clip. port. 3. Accurately connect the 4. Secure the extension module extension module to the MPU by to the MPU by pushing down the using the pinholes at each corner. fixing clips. 5. Order of the I/O point No.: The input points of the first extension module are lined up from X20 and output points are lined up from Y20. The rule applies to all MPU connections with extension modules of any number of points.

Y0 ~ Y3 - Y20 ~ Y37 \ Troubleshooting ™ Input LED Indicator The On/Off of input signals can be indicated by the input LED indicator. When the input is On, the LED will be on. If error occurs, please check if the loops of the LED and input signal are normal by using HPP/WPL. Please also be aware that: 1. Do NOT place DVP08ST11N under direct sunlight and please avoid placing it next to overheating objects in case the high temperature will affect the functions of DVP08ST11N. 2. Please clean the airborne or conductive dust on the panel on a regular basis. The content of this instruction sheet may be revised without prior notice.

Please consult our distributors or download the most updated version at http://www.delta.com.tw/industrialautomation 2 Model DVP08ST11N Items Power voltage 24VDC (-15% ~ 20%) (Power is supplied by the internal bus of MPU) Power consumption 0.5W ESD(IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge EFT(IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O: 1KV, Analog & Communication I/O: 1KV Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV RS(IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m Noise immunity Operation : 0°C ~ 55°C (Temperature), 50 ~ 95% (Humidity), Pollution degree 2 Storage:

-40°C ~70°C (Temperature), 5 ~ 95% (Humidity) Operation/storage Vibration/ Shock International standard: IEC1131-2, IEC 68-2-6 (TEST Fc)/IEC1131-2 & IEC 68-2 immunity Weight (g) 60g Model Input points Output points No. of input points No. of DVP12SA11R 8 4 X0 ~ X7 DVP08ST11N 8 0 X20 ~ X27 DVP16SP11R 8 8 X30 ~ X37 Y

Стр. 2