Руководство по эксплуатации Kuhnke HU24 Linear Solenoid (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk HU24 Series Linear Solenoid Push or Pull Type 1) Other DC voltages are available on request . Weight: Complete solenoid: appr. 27 g Armature: appr. 5 g Standard: Voltage: 24 V DC Flying leads: 10 cm Insulation class: E (max. permissible temperature = 120 ° C) HU 240 - F 24 V DC 100% ED 2) If solenoid is mounted directly onto a flat metal surface of at least 100 cm 2 , the duty cycle can be extended up to 1.3 x nominal rating 3) Stroke 4 mm 10 %ED Document LNSHU2/12 Revision 00 2 3 4 5 8 F/N 2 5 0,7 1 40 25 15 Force vs.

Stroke diagram F = f (s) 0,5 Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature 0,2 0,3 100 0,1 stroke s = 0 corresponds to armature in fully home position 0 2 1 3 4 5 6 s/mm Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

HU 24 0 – F – 24 V DC 100 % ED Ord er specifications HU Line ar solenoid 24 Size s Desi gn type 0 Pull type solenoid 4 Thrust type solenoid Coil terminals F Flying leads (10 cm standard length) A Push-on connector (optional) 24 Nom inal voltage (standard voltage)1) 100 % ED Per m. duty cycle under air cooled conditions (LK) 100 40 25 15 5 % Perm. duty cycle (ED)2) 2,9 6,7 11 15 44 W Nominal coil power Pn 14 5 ms Actuation time (ED)3)

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk HU24 Series Linear Solenoid Push or Pull Type 10 7 Ш6 17,5 Dimensions given with armature in fully home position Direction of stroke 10 7 16 0,8 Document LNSHU2/22 Revision 00 2 17,5 Dimensions given with armature in fully home position Direction of stroke Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

Series HU 240 pull type solenoid M3 2 9 14 16 8 Ø2 10 3,5 24 ≤0,8 33 9 14 16 10 3,5 Series HU 244 thrust type solenoid M3 14 9 Ø6 8+1 10 M2 24 15 ±0,3 40 10 Ø6 8+1 15 ±0,3 M2 40

Стр. 2