en Operation Note The swivel arm features an “Easy Armlift” function which supports the upwards move- ment of the swivel arm. Operation W W Risk of injury! Do not insert mains plug until all prepa- rations for working with the appliance are complete. Selecting the operating position: ■ ■Press the Release button and move the swivel arm. Support movement with your hand. ■ ■Move the swivel arm until it engages in Attention! Do not operate the appliance without an accessory/tool in the operating position. Do not operate the appliance empty. Do not expose appliance or accessories to heat sources. Parts are not microwave-safe. the required position.
■ ■Before operating the appliance and accessories for the first time, clean thor- oughly; see “Cleaning and servicing”. Important information In these instructions for use the recom- mended reference values for the operating speed refer to appliances with a 7-setting rotary switch. For appliances with a 4-setting rotary switch you can find the values in brackets after the values for a 7-setting rotary switch. These operating instructions contain a sticker with reference values for the operat- ing speed of the appliance when using the tools or accessories. We recommend attach- ing this sticker to the appliance (Fig. C ) . Preparation ■ ■Place the base unit on a smooth, clean surface.
■ ■Pull out the power cord (Fig. D ) . MUM52../MUM54../MUM58.. Cord store: Pull out cable to the required length. MUM55../MUM56.. Automatic cord winder: Pull out the cord in one go to the required length (max. 100 cm) and slowly release; the cord is locked. Reducing the cord length: Pull gently on the cord and allow it to roll up to the required length. Then gently pull the cord again and slowly release; the cable is locked. * Insert / remove whisk, stirrer or kneading hook. Add large quantities of ingredients. 21 124_MUM58xxx_8001027214.indb 21 27.11.2015 15:11:45 Position Drive MUM52.. MUM 54/55/ 56/58.. 7 1-4 1-4 1-2 2 7 * – 6 2-4 2-3 9 3-4 7 3-4