en Operation Warning! Do not twist the cord when inserting it. If the appliance features an automatic cord winder, do not insert the cord manually. If the cord jams, pull out the cord all the way and then allow it to wind up. Note: If using the kneading hook, rotate the dough deflector until the kneading hook can lock into position (Fig. E -4b) . ■ ■Put the ingredients to be processed into the bowl. ■ ■Press the Release button and ■ ■Insert the mains plug. move the swivel arm to position 1 . ■ ■Attach the cover. Bowl and tools W W Risk of injury from the rotating tools While the appliance is operating, never place fingers in the mixing bowl.
Attach the cover (12) before operating the appliance! Do not change tools until the drive has come to a standstill – when the appliance is switched off, the drive continues running briefly and stops in the tool change position. Do not move the swivel arm until the tool has come to a standstill. For reasons of safety the appliance may only be operated when unused drives have been covered with drive guards (5, 8). ■ ■Set the rotary switch to the desired Our recommendation: setting. – – Stirrer: first stir in at setting 1 (1), then select setting 7 (4) – – Whisk: setting 7 (4), mix in at setting 1 (1) – – Kneading hook:
first stir in at setting 1 (1), knead at setting 3 (2) Adding more ingredients Attention! Use bowl with this appliance only. ■ ■Switch off the appliance with the rotary switch. ■ ■Add more ingredients through the feed Stirrer (13) for stirring dough, e.g. cake mixture tube in the cover. or Whisk (14) for whisking egg whites, cream and light dough, e.g. sponge mixture ■ ■Remove lid. ■ ■Press the Release button and Kneading hook (15) for kneading heavy dough and mixingin ingredients that ought not be cut (e.g. raisins and chocolate chips) move the swivel arm to position 2 . ■ ■Add ingredients. After using the appliance ■ ■Switch off the appliance with the rotary switch. ■ ■Remove mains plug.
Working with the bowl and the tools Fig. E : ■ ■Press the Release button and ■ ■Remove lid. ■ ■Press the Release button and move the swivel arm to position 2 . ■ ■Insert the bowl: Tilt the bowl forwards and then set it down. Turn anti-clockwise until it locks into place. ■ ■Depending on the processing task, insert move the swivel arm to position 2 . ■ ■Take the tool out of the drive. ■ ■Remove the bowl. ■ ■Clean all parts, see “Cleaning and servicing”. the stirrer, whisk or kneading hook until it locks into position. 22 124_MUM58xxx_8001027214.indb 22 27.11.2015 15:11:45