en Operation W W Risk of injury Do not grip the sharp blades or edges of the cutting discs. Take hold of cutting discs by the edge only. Before attaching / removing the continuousfeed shredder, wait until the drive has come to a standstill and pull out the mains plug. Do not reach into the feed tube. Continuous-feed shredder Warning! The reversible shredding disc is not suitable for shredding nuts. Shred soft cheese with the coarse side only at setting 7 (4). Grating disc – medium-fine for grating raw potatoes, hard cheese (e.g. Parmesan), cooled chocolate and nuts. Process at setting 7 (4). Warning! The continuous-feed shredder must be completely assembled before use.
Never assemble the continuous-feed shredder on the base unit. Operate the continuous-feed shredder in the indicated operating position only. Warning! The grating disc is not suitable for grating soft cheese and cheese slices. Working with the continuous-feed shredder Fig. G : ■ ■Press the Release button and Predetermined breaking point Fig. F : The built-in predetermined breaking point protects the drive of the appliance. If an overload occurs, the drive shaft of the con- tinuous-feed shredder breaks. However, the drive shaft can easily be replaced. A new disc holder with drive shaft is available from customer service. move the swivel arm to position 2 . ■ ■Insert the bowl:
Tilt the bowl forwards and then set it down. Turn anti-clockwise until it locks into place. ■ ■Press the Release button and move the swivel arm to position 3 . ■ ■Remove drive cover from the drive of the Reversible slicing disc – thick / thin for slicing fruit and vegetables. Process at setting 5 (3). Designation on the reversible slicing disc: “1” for the thick slicing side “3” for the thin slicing side continuous-feed shredder (Fig. G -5a) . ■ ■Hold disc holder at the lower end, ensur- ing that the two tips are face up. ■ ■Carefully place the required slicing or shredding disc onto the tips of the disc holder (Fig. G -6a) .
In the case of reversible discs, ensure that the required side is face up. ■ ■Grip disc holder at the upper end and Warning! The reversible slicing disc is not suitable for slicing hard cheese, bread, rolls or choco- late. Slice boiled, waxy potatoes only when they are cold. insert into the housing (Fig. G -6b) . ■ ■Attach the cover (note mark) and turn all the way in a clockwise direction. ■ ■Place continuous-feed shredder on the Reversible shredding disc – coarse / fine for shredding vegetables, fruit and cheese, except for hard cheese (e.g. Parmesan). Processing at setting 3 (2) or 4 (3). Designation on the reversible shredding disc:
“2” for the coarse shredding side “4” for the fine shredding side drive and rotate all the way in a clockwise direction, as illustrated in Fig. G -8 . ■ ■Turn rotary switch to recommended setting. ■ ■Put food to be processed in the feed tube and push down with the pusher. 23 124_MUM58xxx_8001027214.indb 23 27.11.2015 15:11:46