en Storage Cleaning the bowl and tools The bowl and tools are dishwasher-proof. Do not wedge plastic parts in the dish- washer, as they could be permanently deformed during the washing process! Troubleshooting W W Risk of injury! Before eliminating a fault, pull out the mains plug. Important information for MUM54../MUM55../MUM56../MUM58.. The Operating indicator flashes if the appli- ance has been operated incorrectly or the electronic fuse has tripped or the appliance is defective. The swivel arm must be engaged in every operating position. Initially try to eliminate the problem which has occurred with the help of the following information.
Cleaning the continuous-feed shredder All parts of the continuous-feed shredder are dishwasher-proof. Tip: To remove the red film after processing e.g. carrots, pour a little cooking oil on a cloth and rub the film off the continu- ous-feed shredder (not the cutting discs). Then rinse the continuous-feed shredder. Cleaning the blender Fault Appliance does not start. W W Risk of injury from sharp blades! Do not touch blender blades with bare hands. The blender jug, lid and funnel are dishwasher-proof. Remedial action ■ ■Check the power supply. ■ ■Check the mains plug. ■ ■Check swivel arm. Correct position? Tip:
After processing liquids, it is often suffi- cient to clean the blender without removing it from the appliance. Pour a little water and washing-up liquid into the attached blender. Switch on the blender for several seconds (setting M ). Pour out the water and rinse out the blender with clear water. Engaged? ■ ■Screw on blender or bowl as far as possible. ■ ■Attach the blender cover and screw on as far as possible. ■ ■Attach drive cover to unused drives. ■ ■The safety lock is active. Switch Important information If required, clean accessories bag. Follow care instructions in the bag. appliance to P and then back to the required setting. Fault Appliance switches off during use.
The overload protection feature has been activated. Too much food was processed at one time. Storage W W Risk of injury! When the appliance is not in use, pull out the mains plug. Remedial action ■ ■Switch off the appliance. Fig. K : ■ ■Store tools and cutting discs in the acces- sories bag. ■ ■Keep accessories bag in the bowl. ■ ■Reduce processing quantity. ■ ■Do not exceed permitted maximum quan- tities (see “Application examples”). ■ ■To store in the original packaging, see Fig. L . Fault While the drive was running, the release button was inadvertently pressed. The swivel arm moves up. The drive switches off, but does not stop in the tool change position.
25 124_MUM58xxx_8001027214.indb 25 27.11.2015 15:11:46