Руководство по эксплуатации Kuhnke E9 Rotary Solenoid (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk E9 Series Rotary Solenoid * By using a cooling surface 1600 cm 2 , the permissible duty cycle can be extended up to 1.7x normal rating M A = Initial torque M E = End torque (5 ° before end of rotary angle) Coil terminals: - Flying leads - Terminal box (6.3 DIN 46247) Weight: appr. 4500 g Dyn. moment of inertia (rotational mass): appr. 150 10 --6 kg m 2 Time constant: appr. 15–80 ms All solenoids with M A > 18.0 Ncm are available with spring return, with a rating of M R = 15.0 Ncm approximately. The operational voltage of 205 V DC results from rectifying 230 V AC with a bridge rectifier.

ca.31 19 30 Document RSE900/13 Revision 00 2 Ш12 h9 ca.122 ca. 110 100 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

Voltage rati ng V DC 24 205 V DC V oltage rating ED* LK % 100 70 40 25 15 10 100 60 35 25 10 6 % ED* LK Current ratin g A 1,75 2,80 4,45 7,05 13,30 16 ,50 0,25 0,39 0,62 0,81 1,95 3,15 A C urrent rating Nominal res istance  13,80 8,60 5,40 3,40 1,80 1 ,45 816 533 329 252 105 65  Nomin al resistance E 92, 25° MA Ncm 140 220 180 260 230 305 300 355 395 4 420 4 30 50 145 225 195 270 250 320 280 345 420 440 480 490 Ncm MA E 92, 25° ME Ncm Ncm ME E 93, 35° MA Ncm 95 205 140 240 190 280 280 320 345 3 360 3 80 60 105 210 145 250 220 285 245 315 370 360 440 370 Ncm MA E 93, 35° ME Ncm Ncm ME E 94, 45° MA Ncm 85 195 125 230 175 260 245 285 330 3 310 3 60 15 95 205 135 240 195 265 230 280 350 315 410 320 Ncm MA E 94, 45° ME Ncm Ncm ME E 96, 65° MA Ncm 35 185 55 215 80 245 125 260 220 2 275 2 60 80 40 190 60 220 90 256 115 260 245 280 310 280 Ncm MA E 96, 65° ME Ncm Ncm ME E 99, 95° MA Ncm 22 130 33 150 48 165 70 175 110 1 185 1 30 90 25 135 36 155 53 175 63 175 120 185 155 190 Ncm MA E 99, 95° ME Ncm Ncm ME 7 30 ±0,5 68 Ø70

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk E9 Series Ordering Information Order specifications Rotary solenoid Angular travel 25 ° 35 ° 45 ° 65 ° 95 ° Shaft design Coil terminals Terminal box 2) Flying leads (20 cm standard length) Standard voltage Nominal voltage (connected to 230 V AC with Si-bridge rectifier) Perm. duty cycle under air cooled conditions (LK) 2) Suits push-on connector 6.3 DIN 46247 and plug-in socket Z801. Insulation class: B (max. permissible temperature = 130 ° C) Test voltage: 2500 V (eff) Accessories:

Plug-in socket Z801 Document RSE900/23 Revision 00 2 41,0 10,0 Plug-in socket Z801 Screw joint PG 9 for lead diameter 4.5 - 7 mm 5,5 34,2 Plug-in socket Z811 Screw joint PG 11 for lead diameter 6 - 9 mm Plug-in socket with built in Si-bridge rectifier (30,5) Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. E 9 4 -LOL- - N - 24 V DC 100 % ED E 9 2 3 4 6 9 -LOL- F N 24 205 100 % ED Ø 1

Стр. 2

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk E9 Series Shaft & Rotation Options Document RSE900/33 Revision 00 2 United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. Normal Spring return LOO LOL LOR ROO ROL ROR BOO BOL BOR Spring return ØD LF Shaft designs The following types of rotary sole- noids are available. Resulting in the following abbrevia- tions for ordering: 1.

letter Direction of rotation (facing the out- put shaft) L anti-clockwise rotation R clockwise rotation B shaft extensions both ends 2. letter Centering shoulder O standard type without mounting ring R optional L optional 3.

letter Return spring – the torque exerted by the spring is to be subtracted from the torque values given in the data sheets L on the anti-clockwise shaft end R on the clockwise shaft end O no return spring fitted B both sides Example 1 anti-clockwise rotation, no return spring, standard shaft length LOO - Example 2 shaft extensions on both ends, return spring on anti-clockwise rotation end BOL - Spring return arrangement (with protection cap) Spring return ØD LF Solenoid size 0 Mounting ring Dimensions in mm E9 h1 D M ounting ring Ø D 32,0 Ø LF 8,0 Ø Dh10 28,0 LZ LZ 4,5 Normal Spring return LOO LOL LOR ROO ROL ROR BOO BOL BOR

Стр. 3