CANopen Slave Communication Module IFD9503 z Main index: H’2004-----input function parameters z Main index: H’2005-----multi-step speed and PLC parameters z Main index: H’2006-----protection parameters z Main index: H’2007-----motor parameters DVP-PLC Application Manual 42 Sub-index Parameter No. Parameter funcion (hex) 1 03-00 Multi-function output relay 2 03-01 Multi-function output MO1 3 03-02 Multi-function ouput MO2 ┊ ┊ ┊ D 03-12 Fan control E 03-13 Break release frequency F 03-14 Break engage frequncy Sub-index Parameter No.
Parameter funcion (hex) 1 04-00 AUI analog input bias 2 04-01 AUI bias polarity 3 04-02 AUI input gain ┊ ┊ ┊ 18 04-23 Deceleration ratio of deceleration gear 19 04-24 Index angle for simple index function 1A 04-25 Deceleration time for simple index function Sub-index Parameter No. Parameter funcion (hex) 1 05-00 Setting up the 1st step speed frequency 2 05-01 Setting up the 2nd step speed frequency 3 05-02 Setting up the 3rd step speed frequency ┊ ┊ ┊ 21 05-32 Setting up the unit of operation time 22 05-33 The amplitude of wobble vibration 23 05-34 Wobble skip frequency Sub-index Parameter No.
Parameter funcion (hex) 1 06-00 Over-voltage stall prevention 2 06-01 Over-current stall prevention during accel 3 06-02 Over-current stall prevention during operation ┊ ┊ ┊ 11 06-16 User-defined low-voltage detection level 12 06-17 User-defined low-voltage detection time 13 06-18 Reserved Sub-index Parameter No. Parameter funcion (hex) 1 07-00 Motor rated current