Altivar 16 AC Drive Display and adjustment of parameters Display Options VW3A16101 Three display /adjustment options are available for monitoring and changing Altivar 16 parameters. These allow local or remote dialog, or connection to a personal computer. Description For Drive Catalog Weight Numbers lbs (kg) Display/adjustment [1] ATV16 all ranges VW3A16101 _[4] 0.55 (0.25) Display/adjustment/ ATV16 all ranges VW3A16102_ [4] 0.55 (0.25) local control [1] VW3A16102 Kit for remote mounting of ATV16 all ranges VW3A16103 1.10 (0.50) the display/adjustment options [2] [1] Keypad mounts on front of drive. To mount remotely, order kit VW3A16103 also.
[2] Kit is comprised of an interface box which mounts to front of drive, a 3 meter cable and a plastic keypad cover. [3] Kit is comprised of an interface box which mounts to the front of the drive, a 3-1/2" software disk, a 3 meter 9-pin to 9-pin cable, and a 9-pin to 25-pin adaptor. [4] This number indicates an option without a user's manual. Add a letter at the end of the part number to obtain a user's manual in the following languages: U = English (United States), E = English (U K), F =French, G =German, S =(Spanish). Connection to PC [3] ATV16 all ranges VW3A16104 1.10 (0.50) Description of the display option [5] VW3A16104 The VW3A16101 has 4 keys, 1 LED and three 7-segment displays.
A switch on the back allows selection of the adjustment mode or operation mode (indicated by the LED). In the operation mode, adjustment of parameters is not possible, only display of electrical quantities, fault codes and parameter values.
Configuration parameters (not displayed during operation) UnS Nominal motor voltage (V) FrS Nominal motor frequency (Hz) tFr Maximum output frequency of drive (Hz) UFt Voltage/frequency ratio (L, n or P; factory set to n) brA Deceleration ramp adaptation (yes or no; factory set to yes) SLP Slip compensation (yes or no; factory set to yes) ATV16U09M2 + VW3A16101 Adjustment parameters Acc Acceleration ramp time (s) dEc Deceleration ramp time (s) LSP Low speed (Hz) HSP High speed (Hz) UFr Voltage/frequency ratio adjustment (from 00 to 100, factory set to 20) FLG Frequency loop gain (from 00 to 99, factory set to 33) ItH Motor thermal protection (A) Display of electrical quantities FrH Reference frequency (Hz) Lcr Motor current (A) ULn Supply input voltage (V) ATV16U09M2 + VW3A16104 [5] See detailed description of functions, pages 16 to 18.
10