Chapter 3 Instruction Tables 3_ 3-51 Instruction code Pulse Classification API Function 16-bit 32-bit instruction 0078 ORZ= DORZ= – |S1-S2|=|S3| 0080 ORZ> DORZ> – |S1-S2|＞|S3| 0081 ORZ>= DORZ>= – |S1-S2|≧|S3| P 1403 PUSTAT – – Reading PU module output state 1009 PWD – – Pulse width detection 2702 PWM DPWM – Pulse width modulation R 0703 RAMP DRAMP – Ramp signal 1517 RAND – Random number 0903 RCL DRCL Rotating to the left with the carry flag 0901 RCR DRCR Rotating to the right with the carry flag 0600 REF – Refreshing the I/O 0602 REFF – Refreshing the I/O filtering time 0207 RMOV – Converting a 32-bit value into a 16-bit value 0902 ROL DROL Rotating to the left 0900 ROR DROR Rotating to the right 1000 RST DRST – Resetting the contact or clearing the register 2809 RSTD – – Sending Reset or NMT command S 0216 SCAL DSCAL Scale value operation 0222 SCLM DSCLM Multi-point area ratio operation 2203 SCLOSE – Closing the socket 0217 SCLP DSCLP Parameter type of scale value operation 2209 SCONF – Setting TCP/UDP socket parameters 1204 SEGD – Seven-segment decoding 1704 SEGL – – Seven-segment display with latches 1200 SER DSER Searching the data 2501 SFCPSE – – Causing SFC to pause 2500 SFCRUN – – Enabling SFC 2502 SFCSTP – – Stopping SFC 1107 SFDEL – Deleting the data from the data list 1108 SFINS – Inserting the data into the data list 1111 SFL DSFL Shifting the values of the bits in the registers by n bits to the left 1106 SFPO – Reading the latest data from the data list 1110 SFR DSFR Shifting the values of the bits in the registers by n bits to the right 1105 SFRD – Shifting the data and reading it from the word device 1101 SFTL – Shifting the states of the devices to the left