3 i5601E Digital Display Unlocking the “Hot Keys” This is a popular way to expand the use of the i5601E. To unlock the hot keys and allow for additional data selections go to the “Main Menu,” as described on previous page. Select “Monitor Settiings,” then select “Hot Keys.” Move the selection from “Hot Keys Locked” to “Hot Keys.” Exit the menu back to the normal operating screens. You will see a right hand arrow above key 5 when any key is pressed. The Right Arrow button changes the menu to allow selection of each block. Pressing a block key will cycle through the choices listed on the next page (respective of engine). The choices are presented in alphabetical order.
Bold items are the default settings and will appear unless replaced by another listed item. Example using a quad screen: 1 2 3 4 5 Hot Keys 1 2 3 4 5 Block Keys Each button cycles the related block through the respective engine list on the next page. Note: Data in NMEA 2000 ® format may be added to the CAN Bus system from a compatible device which supplies the optional parameters listed on the next page. The i5601E display has the capability of displaying additional information as other devices with NMEA 2000 ® communication capabilities are added to the vessel. For additional NMEA 2000 ® information see the “Networks” section of this manual. © 2011 Yanmar Marine International • Rev.
2.0 3:8 Yanmar Electronic Control Systems Technical Manual