1. COMMON MODEL INFORMATION TIE BAR INSTALLATION (DUAL MOTORS WITH CABLE STEERING) For BF200NBF225A see DUAL MOTOR INSTALLATION on page 8-1 1. 1. As described in the applicable model-family chapter, set up steering cable and steering link arm. STEERING WASHER (2) 2. Install a steering plate on each motor. TORQUE: 34 N*m (25 ft-lb) I O X 1.25 mm (2) \' . DESCRIPTION PART NO. I Tie Bar Kit I 50850-ZV5-000AHl PARTS LISTING ITEM 1 l a I b I c I d QTY DESCRIPTION 1 Tie bar assembly 2 3/8-24 UNF Self-locking nuts 2 1/2-3/8 in Reducer bushings 2 3/8 in I.D.
Flat washers 2 3/8-24 UNF Hex head bolts I l e I 2 11/2-20 UNF Right hand thread jam nuts I I I f I 1 11/2-20 UNF Left hand thread jam nut I One end of the tie bar center tube, threaded rod, and rod end have left-hand threads while the other end has right-hand threads. If the tie bar assembly should become disassembled, do not try to interchange the parts from one end to the other. Date of Issue: June 2003 0 2001-2003 American Honda Motor Co.. Inc. 1-24