Peterbilt SmartLINQ Manual How to Get Vehicle Information The Fleet Health Tool categorizes your fleet into groups as denoted by “Recommendation”. Each Recommendation icon lets the user choose the visibility of chassis in the Fleet Map. The Eye icon indicates which pins will appear on the map with the location(s) of the vehicle(s) in that category. If your vehicles are not showing on the map, please contact your dealership. If your vehicle pin has not moved in over an hour of vehicle run time, there may be a hardware issue on that truck. Selecting the Box-and-Arrow icon for one of the Recommendation will display a list (not shown) of only the vehicles in that category.
For a more detailed explanation of the vehicle’s health, select a pin on the map. An information box will pop up with the Unit# (if provided), VIN#, Recommendations and Last Update for that vehicle. Select the VIN# and the Recommendation (Service Now), Vehicle Information and Active Fault Codes are displayed. The Last Location section includes the address of where the vehicle last updated. If you select the address it pulls up a snapshot of the map and a pin indicating where the vehicle was last located. Select the Information icon. Rev. 01/18 PB