Peterbilt SmartLINQ Manual The Details section expands out to show finer detail about a fault code. Fault Information gives a description of the problem, a fault occurrence count, current state of the engine and any additional information. Troubleshooting Guidance shows the possible causes if available and a check mark will show if there are items the driver can check or perform to possibly avoid a service event. The Event Location section includes the address of the where the fault event occurred. If you select the address it pulls up a snapshot of the map and a pin indicating where the vehicle was located at the time the event was reported.
The Snapshot Data section displays useful system information about your vehicle. Each event records 70 seconds of data; 60 seconds prior to the event and 10 seconds after. The Authorized Dealer for Repair section shows the three nearest authorized dealerships. Contact information, Hours of Operation, Phone Number and Approximate Distance from the vehicle’s location at time of the event are also included. If the fault code generates an email, a record of that email can be found in the Email section. Rev. 01/18