36 SPECIFICATIONS Additional Bottom Of Engine Components Lube Valve Housing Attaching Screws (4) Hand start all, then tighten to 48 ± 8 Nm (35 ± 6 lb-ft) Crankshaft Bearing Caps Discard screws with four marks when removed and substitute new screws. Step 1. Attaching Screws 150 ±20 Nm (111 ± 15 lb-ft) Step 2. Angle tighten 120° ± 5° Connecting Rod Bearing Caps Discard screws with four marks when removed and substitute new screws. Tighten screws in a cross pattern Step 1. Attaching Screws 20 ±3 Nm (15 ± 2 lb-ft) Step 2. 60 ± 3 Nm (44 ± 2 lb-ft) Step 3.
Angle tighten 90° ± 5° Oil Pan Drain Plug 60 ± 10 Nm (44 ± 7 lb-ft) Oil Pump Attaching Screws 24 ± 4 Nm (18 ± 3 lb-ft) Nozzle Attaching Screws, Piston Cooling Do not reuse 24 ± 4 Nm (18 ± 3 lb-ft)