SPECIFICATIONS 37 Oil cooler, retaining bolts Step 1 .........................................................................................5 ± 1 Nm (44 ± 9 in-lb) Step 2 ........................................................................................27 ± 4 Nm (20 ± 3 ft-lb) T2022733 Note: Tighten the bolts diagonally and finish by tightening the first bolt again. Oil cooler cover T2023837 Position the cover to the engine block and install bolt (A) into the oval hole. Press the cover against the water pump housing using an assembly tool 88800022 and install bolt (B). Check that the cover is positioned correctly.
Install bolts C and D and tighten ..............................................24 ± 4 Nm (18 ± 3 ft-lb) Tighten the cover bolts from the middle and outwards in order 1–4 as shown.... 24 ± 4 Nm (18 ± 3 ft-lb) Finish by checking the torque for bolts C and D......................24 ± 4 Nm (18 ± 3 ft-lb)