. OPERATION EXPLANATION OF COMPONENTS REAR VIEW MIRROR switch is of the 3 - 6 Use this rear vi ew mirror machine from th e operato r's seat. Before starting o perations , adjust t he angle of t he mirror t o ensure a good view to t he rear. To ensure that the angle mirror operation, chec k that ther e is no l ooseness of the mount. UNDER MIRROR 2) to check the area under the machine from the Use this mirror ( operator's seat. Before starting o perations , adjust t he angle of t he mirror t o ensure a good view und er the ma chine. of the mirror does not change during ooseness of the mount. To ensure that the angle mirror operation, chec k that ther e is no l ooseness of the mount.
COMBINATION LAMP The turn signal lamp a combination lamp (3). Turn signal lamp:Turn sig nd clearance lamp are built into this nal lamp in direction of turning flashes The turn signa combination lam Turn signal lam irection when tur lamp sw turn sign n signal lever is ope rated. If th e hazard itch is tu rned ON, bo th the left and r ight al lamp s flash at the same time . Clearance lamp :Clearanc e lamps turned O These s machine to the le ft and right a t night