OPERATION 2.18 Power outlets Operation_Pic_number:1 Operation_Pic_number:1 Fig.28 Fig.26 A = Trailer socket. Text-module A = 25 A constant current socket. B = 10 A socket. C = Implement socket. D = Socket (blue) for external pulse counter. E = LBS-ISO socket (optional) short circuit plug must remain in place due to feed- back. F = Camera socket (optional). Operation_Pic_number:1 Pin - attribution LBS-ISO implement socket cabin Operation_Pic_number:1 Fig.29 A = Electro-hydraulic external control: Socket for external sensor. Operation_Pic_number:1 Fig.27 A = Connector within cabin. B = Connector for LBS-ISO Terminal. Pin 1 = not used. Pin 2 = CAN Low input. Pin 3 = CAN Low output.
Pin 4 = CAN High input. Pin 5 = CAN High output. Pin 6 = CAN-EN. Pin 7 = Power supply for connected implement (maximum load 5A). Pin 8 = CAN GND. Pin 9 = Ground connection for connected imple- ment. Fig.30 LBS-ISO socket (A) rear (optional). 29