Fendt 900 Vario Series Operating Manual PDF (EN)

OPERATING MANUAL

Vehicle type ............................. Chassis No. ............................. After-Sales Service Vehicle delivery Vehicle pre-delivery inspection by the Service Workshop For information, technical date etc. refer to Service Schedule. Check oil level, top up if necessary. Engine, transmission, axle drives, front axle differential, hub drives, front PTO, lift shaft lubrication. Fill the hydraulic system with additional oil for external consumers as per customer order. Check fluid level, and top up if necessary. Cooling system, clutch operation, brake actuation, air conditioning if installed. Grease vehicle as per Lubrication Chart, lubricate all joints. Check steering and toe-in.

Check tyre pressures. Check that wheel nuts are firmly attached. Test electrical system. Check fault memory. Check battery charge status. Check the function and settings of the lighting and signalling system. Fill up with diesel, use pre-filter if necessary. Check that brakes are working effectively. Information to be given on vehicle delivery Draw attention to safety instructions within the Operating Manual and on the vehicle itself. Information on keeping to countryu-specific regulations regarding vehicle speed and trailer braking systems. Explain the following features in detail - see index - and show how they are operated. See also separate vehicle delivery test log.

Operating controls, transmission, multiple display, initial start-up, starting, and switching off, fault display, code table, clearing the warning and fault messages. Explain "Important Information on Service and Maintenance". See inside back cover. Hand over tool box accessories. Fill in warranty and delivery card and forward immediately to the factory. For 50 km/h version, draw attention to the required regular vehicle inspections (country-specific). Vehicle delivered on . . . . . . . . . . . . . . . Signature of mechanic . . . . . . . . . . . . . . . . .

Стр. 2

OPERATING MANUAL

OPERATING MANUAL FENDT 916 Vario From chassis number 916 .. 7001 FENDT 920 Vario From chassis number 920 .. 7001 FENDT 924 Vario From chassis number 924 .. 7001 FENDT 926 Vario From chassis number 926 .. 7001 FENDT 930 Vario From chassis number 930 .. 2001 ETManufacturer ETAuthor AGCO GmbH Maschinen und Schlepperfabrik D-87616 Marktoberdorf / Bavaria / Germany Telephone +49 8342 77-0 Facsimile +49 8342 77-222 © PSD / Ko - SG 10.04 2941 F - en

Стр. 3

OPERATING MANUAL

Customer-notes Text-module Marking of places that affect your safety Make sure that any other users have read all the safety instructions as well. The various levels of safety instructions can be distinguished as follows: Dear Customer, Please note the following: Before using the tractor, carefully read through this Manual to familiarize yourself with all operating controls and their functions before you begin work. This also applies to the operating instructions of the implement manufacturer. Follow all the operating and maintenance in- structions. If you do so, your tractor will give you many years of economic and trouble-free operation.

You will find an overview of all maintenance operations in the Service Sche- dule in this Manual. Maintenance and repair work should be car- ried only at your service workshop. see also the "Important service and maintenance infor- mation". DANGER: Risk of serious accident. WARNING: Risk of injury. CAUTION: Possible risk of injury. Text-module Text-module The Operating Manual is an integral part of the vehicle package and must be passed on to any subsequent owner in the event of resale. The at- tention of the new owner should be drawn to this information.

If this Manual is lost or damaged and you need a new one, please contact your Fendt dealer, There you will be able to purchase a replace- ment. Authorised use This tractor is designed only for normal agricultu- ral operations or similar purposes, for example in municipal applications. Any other type of use is considered unauthori- sed. The manufacturer will not be liable for any damage resulting from such uses, which will be entirely at the owner's risk. Authorised use also means fulfilling the opera- ting, service and maintenance conditions set out by the manufacturer.

Operation, maintenance and repair of the tractor is restricted to persons who are familiar with this kind of work and aware of the inherent dangers. All relevant accident prevention regulations and all generally accepted health & safety standards and road traffic regulations must be observed The manufacturer does not accept liability for da- mage resulting from unauthorised modifications. Vehicle Identification Number Operation_Pic_number:ETpicture-module Text-module Text-module The Vehicle Identification Number is on the right frame and also stamped on the rating plate. Text-module All specifications in the Manual are subject to the usual tolerances.

We reserve the right to make design changes as part of technical further deve- lopment, without making alterations to this Ma- nual. The drawings and illustrations in the ma- nual are used for function description, some of the items shown are not necessarily included in the vehicle delivery contents. 4

Стр. 4

NUMERICAL INDEX

NUMERICAL INDEX SAFETY INSTRUCTIONS...............9 OPERATION....................................14 7.8 Cruise control.............................................44 7.9 Load limit control........................................46 7.10 Storing engine speeds ...............................47 7.11 Towing instructions ....................................48 1. Driver seat ................................................14 1.1 Super deluxe seat......................................14 2.

Display instruments and operating controls.....................................................15 2.1 Front controls.............................................15 2.2 Glow and starter switch..............................16 2.3 Combination switch....................................16 2.4 Steering wheel adjustment.........................16 2.5 Quick reverse.............................................16 2.6 Dashboard .................................................17 2.7 Indication of fluid levels..............................18 2.8 Operating status display ............................18 2.9 Multiple display ..........................................19 2.10 Operating controls, right.............................19 2.11 Multi-function armrest ................................20 2.12 Operating console, right side .....................21 2.13 Vario terminal.............................................22 2.14 Camera function.........................................26 2.15 Quick Jump................................................26 2.16 Cab top section, front.................................28 2.17 Cab top right side.......................................28 2.18 Power outlets .............................................29 2.19 Reset function............................................31 8.

Fuel consumption measurement............48 8.1 Activating fuel consumption measurement.............................................48 9. Tractor Management System (TMS).......49 9.1 Engine management system .....................50 9.2 Accelerator mode.......................................50 9.3 Setting engine speed range.......................51 10.

PTO............................................................53 10.1 Rear PTO...................................................53 10.2 Engaging and disengaging rear PTO.........54 10.3 Front PTO ..................................................55 10.4 Engaging and disengaging front PTO........56 10.5 Calibrating rear and front PTO coupling ....56 11. Four wheel drive (4-WD)..........................58 12. Differential lock........................................58 13. Front axle suspension.............................59 14.

Power lift and PTO automatic mode ......60 14.1 Power lift automatic mode..........................60 14.2 PTO automatic mode.................................61 14.3 PTO automatic mode with power lift ..........62 3. Heating and ventilation ...........................31 3.1 Heater with 3-speed blower .......................31 3.2 Auxiliary ventilation in cab roof ..................32 3.3 Air conditioning ..........................................32 15.

Brakes.......................................................63 15.1 Foot brake..................................................63 15.2 Hand brake ................................................63 15.3 Trailer brake...............................................64 15.4 Engine brake..............................................64 4. Rearwiew mirror.......................................33 5. Start-up .....................................................33 5.1 Daily check.................................................33 5.2 Cold weather operation..............................34 5.3 Tool box .....................................................34 16.

Steering.....................................................65 16.1 Steering wheel adjustment.........................65 17. Hydraulics.................................................65 17.1 General notes on hydraulic operations ......65 17.2 Valve locking..............................................66 17.3 Valve equipment ........................................67 17.4 Operating the valves..................................67 17.5 Priority function ..........................................69 17.6 Setting the valves.......................................70 17.7 External valve actuation.............................73 17.8 Hydraulic connectors .................................74 6.

Starting and stopping the engine...........34 6.1 Memory function ........................................34 6.2 Starting the engine.....................................35 6.3 Jump starting .............................................36 6.4 Tow-starting ...............................................37 6.5 Stopping the engine...................................37 6.6 Stopping and immobilising the tractor........37 7.

Vario transmission...................................37 7.1 Joystick ......................................................37 7.2 Neutral position..........................................37 7.3 Selecting acceleration rates.......................38 7.4 Driving mode selector ................................39 7.5 Driving the tractor.......................................40 7.6 Changing direction of travel .......................42 7.7 Programmed changes of travel direction ...43 18.

Electronic lifting gear control, rear ........75 18.1 Controls......................................................75 18.2 EPC safety lock..........................................76 18.3 Control panel functions ..............................77 18.4 Working with the EPC................................79 18.5 Electronic slip control.................................81 18.6 Electro-hydraulic external control...............83 5

Стр. 5