00 12 620 Replacing spark plug Emptying drain from intake air silencer (Inspection III) (Inspections I, II and III) – Place the motorcycle on the auxiliary stand, BMW No. 00 1 620 . – Remove right cover ( a 46.6). – Place the motorcycle on the auxiliary stand, BMW No. 00 1 620 . – Remove right cover ( a 46.6). • Have a funnel and drip tray ready. 1 2 K14000180 • Twist rubber ring (1) to release ignition coil from bracket (2). • Disconnect the ignition coil from the spark plug. • Remove the spark plug with the w/f 18 socket wrench. • Installation is the reverse of the removal proce- dure. K14000190 • Open the hose clamp and remove the cap (arrow). e Attention:
Dispose of used oil in an environmentally compati- ble manner. X Tightening torque: Spark plug.................................................... 20 Nm Right and left covers to main frame ................ 2 Nm Right and left covers to air duct...................... 3 Nm Right and left covers to cover, front................ 1 Nm Right and left turn indicators to fairing bracket3 Nm Cover, rear, to right and left covers and stowage-compartment frame ......................... 2 Nm Stowage-compartment rail to stowage-compart- ment frame..................................................... 9 Nm X Tightening torque:
Stowage-compartment rail to stowage-compart- ment frame..................................................... 9 Nm Cover, rear, to left and right covers and stowage-compartment frame ......................... 2 Nm Right and left covers to air duct ..................... 3 Nm Right and left covers to main frame................ 2 Nm Cover, front, to right and left covers ............... 1 Nm Right and left turn indicators to fairing bracket3 Nm 00.42