00 13 630 Replacing air cleaner ele- ment (Inspection III) 3 – Place the motorcycle on the auxiliary stand, BMW No. 00 1 620 . – Remove left cover ( a 46.6). 1 K1400090 2 L Note: Compressing the front part of the air filter element facilitates removal. K14000080 • Remove air filter element (3). • Clean the intake air silencer. • Installation is the reverse of the removal proce- dure: pay particular attention to the following. • Remove the fasteners securing the intake pipe to intake air silencer (1). • Swing intake pipe (2) to the side and lift it up and out of the hook. L Note: Compressing the front part of the air filter element facilitates installation.
• Engage the intake pipe in the hook of the intake air silencer at the bottom and tilt it up. X Tightening torque: Stowage-compartment rail to stowage-compart- ment frame..................................................... 9 Nm Cover, rear, to right and left covers and stowage-compartment frame ......................... 2 Nm Right and left covers to air duct ..................... 2 Nm Right and left covers to main frame................ 2 Nm Cover, front, to right and left covers ............... 1 Nm Right and left turn indicators to fairing bracket3 Nm Intake air pipe to intake air silencer ...........................................
9 Nm K14000470 • Disengage the intake air pipe with rubber grommet (arrow) from the link at the front. 00.43