Chapter 2 Setup DIP Switch 1 Functions The following explains the DIP switch functions. 2 ∗ 1 Executes the self-test once only when the power is turned on. ∗ 2 This is not available for the specifications model that has the dip switch with 8 poles. Transfer Speed Switching ∗ 1 Default Setting ∗ 2 Settings when connecting using a serial (USB controlled) 29 DSW1 No.
Function ON OFF Default Setting 1-1 Received Error Data Ignore Ignore "?" Display OFF 1-2 Receive Data Length 7 bit 8 bit OFF 1-3 Parity With Parity No Parity OFF 1-4 Parity Selection Even Odd OFF 1-5 Communication Speed Switching Refer to " Transfer Speed Switching" ON 1-6 OFF 1-7 ON 1-8 Execute Self-Test *1 Yes No OFF 1-9 *2 Not used Fixed to OFF 1-10 *2 SW1-5 SW1-6 SW1-7 Transfer Speed (bps) ON ON ON 2400 OFF ON ON 4800 ON OFF ON 9600 *1 OFF OFF ON 19200 *2 ON ON OFF 38400 OFF ON OFF 57600 ON OFF OFF 115200 OFF OFF OFF (Reserved)