1-4 Warnings and Notices 1 General Warning for supplement restraint system (SRS) clock spring Warning! - Improper installation of the clock spring assembly will damage the internal spiral coil of the clock spring, which may cause the malfunction of the coil and the SRS module, resulting in personal injury. Warning for disposal of SRS module Warning! - In order to prevent accidental deployment of the SRS and personal injury, the undeployed SRS module should not be disposed as regular workshop waste. Some of the materials contained in the undeployed modules may cause serious illness or personal injury if the sealed container is damaged during the disposal process.
The undeployed airbag module should be safely disposed following the deployable procedure. Warning for pickup and storage of SRS module Warning! - When transporting the undeployed airbag module: ● Do not carry the wire or connector on the airbag module. ● Make sure the airbag opening is not facing you or anyone else. Warning! - When storing an undeployed airbag module, ensure that the airbag opening is not facing the surface where the airbag module is placed. The airbag opening should not face down, and it is forbidden to place any objects on the airbag module. There should be enough space around the airbag for accidental employment, otherwise it will cause personal injury.
- Do not immerse the undeployed airbag module in water or contact with other liquids. - Do not place the undeployed SRS module near the fire source or in a high temperature area to prevent accidental deployment of the SRS and personal injury. Warning! - Do not hit or shake the SRS impact sensor. Before powering on the impact sensor, ensure that the impact sensor is firmly fixed. Failure to follow the correct installation procedures may cause the SRS mistakenly deployed or worked abnormally, resulting in personal injury. Warning for SRS Warning! - This vehicle is equipped with SRS. Failure to observe correct operating procedures may result in the following situations: ● Pretensioner burst.
● Personal injury. ● Unnecessary SRS repair. Warning! - Observe the following guidelines to avoid the above situations: ● Refer to SRS parts view to determine whether you are performing maintenance operations on, around, or on the wiring of SRS parts. ● If you are performing maintenance operations on, around, or on the wiring of the SRS component, disconnect the SRS. Warning for high temperature of deployed SRS module Warning! - After deployment, the metal surface of the SRS parts may be very hot. To avoid fire and ensure personal safety: VOYAH FREE