User Manual EM303B General Purpose Inverter The analog input can be set continuously in the full scale input range of 0.0 ～ 100.0% as 0input can be set continuously in For instance: 1. See Table 7-6 for setting parameter Table 7-6 If analog input is VS/VF (0 ～ 10V) or IS/IF (0 ～ 20mA), see Figure 7-29(a) for the input/output bias. If analog input is VS/VF (2 ～ 10V) or IS/IF (4 ～ 20mA), see Figure 7-29(b) for the input/output bias. 2. See Table 7-7 for setting parameter Table 7-7 If analog input is VS/VF (0 ～ 10V) or IS/IF (0 ～ 20mA), see Figure 7-29(C) for the input/output bias. If analog input is VS/VF (2 ～ 10V) or IS/IF (4 ～ 20mA), see Figure 7-29(d) for the input/output bias.
Setting Frequency Hz Setting Frequency Hz F8-11 100% F MAX F8-11 100% FMAX F8-10 65% F8-10 65% F8-09 30% F8-09 30% F8-08 0.00% 0.00% 10V 7.5V 2.5V 25% 75% 100% Analog Setting F8-08 0.00% 0.00% 2V 10V 8V 4V 25% 75% 100% Analog Setting F8-15 F8-14 F8-13 F8-12 (a) (b) F8-15 F8-14 F8-13 F8-12 136 No. Setting Value No. Setting Value F8-08 0.00% F8-12 0.00% F8-09 30.00% F8-13 25.00% F8-10 65.00% F8-14 75.00% F8-11 100.00% F8-15 100.00% No. Setting Value No. Setting Value F8-08 100.00% F8-12 0.00% F8-09 70.00% F8-13 40.00% F8-10 40.00% F8-14 75.00% F8-11 0.00% F8-15 100.00%