User Manual EM303B General Purpose Inverter Table 6-2 Functions of Numeric Multi-function Output Terminals Table 6-3 F2-16~F2-17 Analog Outputs Full Scales 58 No. Function No.
Function 0 Inverter Runs(Enabled at Running) 17 Overload Alarming Output 1 Frequency Reach Range FAR(Enabled at running) 18 Overvoltage Stall 2 Output Frequency Detection Range FDT1(Enabled at running) 19 Current Limit Output Frequency Detection Range FDT2(Enabled at running) Frequency Zero Speed Detection(Output Frequency Detection) 3 20 4 Output Frequency Detection Range FDT1(Disabled at JOG) 21 Not Used 5 Output Frequency Detection Range FDT2(Disabled at JOG) 22 Motor 2 Enabled 6 Forward/Reverse(Enabled at Running) 23 Setting running time is up 7 Frequency Input/Output Balance (Enabled at Running) 24 Not Used 8 JOG 25 Not Used 9 Inverter Fault 26 Inverter is ready for running 10 Upper Limit Frequency Reach 27 Not Used 11 Lower Limit Frequency Reach 28 FDT1LowerBounds(Pulse) 12 Not Used 29 FDT2LowerBounds (Pulse) Not Used FDT1 LowerBounds(voidwhen JOG, Pulse) 13 30 Analog Detection Range ADT1 FDT2LowerBounds(voidwhen JOG, Pulse) 14 31 15 Analog Detection Range ADT2 32 ILP Fault 16 Analog Detection Range ADT3 No Signal Full Scale(100.0%) No.
Signal Full Scale(100.0%) . 0 Output Frequency Fmax 11 IS 20mA 1 Input Frequency Fmax 12 IF 20mA Synchronous Frequency Fmax Output torque (actual value) 2 times motor rated torque 2 13 Output torque (absolute value) 2 times motor rated torque +10V +10V 3 14 4 Not Used 15 PID Input PID Maximum Scale 5 Not Used 16 PID Feedback PID Maximum Scale 6 Output Current 2 times inverter rated current 17 Not Used 7 Output Voltage 1.5 times inverter rated voltage 18 Not Used VP 5.00V DC Bus Voltage 1.5 times rated input voltage 8 19 9 VS 10.00V 20 Output Power inverter rated power VF 10.00V Estimated frequency /Output torque Fmax/motor rated torque 10 21