User Manual EM303B General Purpose Inverter F0-11, preset speed 1~15 (F3-00 ～ F3-14), PID numeric setting F4-01, and numeric torque current F5-12. F0-29=2Parameter locked 1 Lock parameters except F0-29. Inverter will remain the setting before unlocked. F0-30=0 Set inverter as Model G which is applicable to mechanical or constant torque load. F0-30=1 Set inverter as Model P which is applicable to square or cubic torque load like blower, and water pump. ★ When setting inverter as Model P, the applicable motor power refers to the Nameplate. Note: The constant torque load is not applicable to Model P.
F0-31 sets a password to start password protection and prevent unqualified personnel from editing the inverter parameters incorrectly. When password is 0, the password function is disabled. 8.2 F1 Group: Motor Parameters Remarks: When connecting the inverter to the motor at the first time, please set the above parameters as per the motor nameplate before operation. 92 No. Function Range Unit Default Type Inverter Model 0: Model G 1: Model P 0 〇 F0-30 No. Function Range Unit Default Type F0-31 User Password 0~65535 XXXXX 〇 No. Function Range Unit Default Type Motor Type 0: AC induction motor 1:
Not used 0 〇 F1-00 F1-01 Motor Rated Power 0.40~480.00 kW XXXX 〇 F1-02 Motor Rated Voltage 60~660 V XXX 〇 F1-03 Motor Rated Current 0.1~1500.0 A XXXX 〇 F1-04 Motor Rated Frequency 20.00~600.00 Hz XXXX 〇 F1-05 Motor Rated Speed 1~60000 rpm XXXX 〇 F1-06 Motor Wiring Mode 0:Y, 1：Δ X 〇 F1-07 Motor Rated Power Factor 0.50~0.99 X 〇 F1-14 Motor Efficiency 30.0~99.0 XXX 〇 No. Function Range Unit Default Type F1-08 Idling Excitation Current I0 0.1~1500.0 A XXXX 〇 F1-09 Rated Torque Current 0.1~1500.0 A XXXX × F1-10 Stator Resistance R1 0.001~60.000 Ω XXXX 〇 F1-11 Rotator Resistance R2 0.001~60.000 Ω XXXX 〇