EM600 High-Performance Vector Control Inverter User Manual ESC ESC ESC Figure 4-2 Operation Procedure of Menu Mode Selection 4.2.1 All menu mode (--A--) Press ENTER under the all menu mode to enter the second level menu to select any function code. Press ENTER again to enter the third level menu to review or modify function parameters. Except some special function parameters, those function parameters needed by users can be modified. Under the all menu mode, the whole operation procedure from power-on and initialization to value change of F03.28 to 5.28 is shown in Figure 4–3.
ESC ESC >> ENTER ESC 闪烁位 Flashing >> 闪烁位 bit Flashing bit >> 闪烁位 bit Flashing bit >> Flashing 闪烁位 >> 闪烁位 Flashing bit Flashing bit >> 闪烁位 ENTER 闪烁位 Flashing bit ESC >> >> 闪烁位 Flashing bit >> 闪烁位 Flashing bit Flashing bit >> 闪烁位 闪烁位 Flashing bit Flashing bit ENTER 闪烁位 Flashing bit 闪烁位 Figure 4-3 Operation Procedure from Power-on to Setting F03.28=5.28 48