The die-cut label layout is shown below. Figure 4.3.2-3 Die-cut label layout Table 4.3.2-3 List of die-cut label setting values Epson ESC/Label Application Development Guide CW-C8000 Series Rev. B Page 22 Item Setting range Recommended initial value Command Width [mm] 21.4 to 112.0 108.0 ^S(CLS,P Length [mm] 8.0 to 1016.0 152.4 ^S(CLS,L Gap between labels [mm] 3.0 to 6.0 3.0 ^S(CLS,C Left&Right gap [mm] 0.0 to 6.0 2.0 ^S(CLS,G ^S(CLS,R