• Starting Vacuum Fans. If there is a failure at this point, the Front Panel will display System Error Code XX.X:XX . For more information on troubleshooting this error code, refer to page 47. • Set GPIO psu_lpm. If there is a failure at this point, the Front Panel will display System Error Code 01.0:10 . For more information on troubleshooting this error code, refer to page 47. • Checking voltage. If there is a failure at this point, the Front Panel will display System Error Code 03:10 . For more information on troubleshooting this error code, refer to page 48. • Clear GPIO psu_lpm. If there is a failure at this point, the Front Panel will display System Error Code 01.0:10 .
For more information on troubleshooting this error code, refer to page 47. • Checking voltage. If there is a failure at this point, the Front Panel will display System Error Code 03:10 . For more information on troubleshooting this error code, refer to page 48. 14. A message will appear on the Front Panel asking whether you would like to check the PrintMech. Select Yes or No by using the Up and Down keys and press Enter to confirm your selection. If you select No , the printer skips this test and goes to the next one: 15. If you select Yes , the Printer will check the PrintMech and the following messages will be displayed on the Front Panel: • Starting Sausalito. • Starting Tests GPIO.
Tests and Utilities If there is a failure at this point, the Front Panel will display System Error Code 01.0:10 . For more information on troubleshooting this error code, refer to page 47. • Starting Tests Encoder. If there is a failure at this point, the Front Panel will display System Error Code XX.X:XX . For more information on troubleshooting this error code, refer to page 47. • Starting Vacuum Fans. If there is a failure at this point, the Front Panel will display System Error Code XX.X:XX . For more information on troubleshooting this error code, refer to page 47. • Checking delSOL presence. If there is a failure at this point, the Front Panel will display System Error Code XX.X:XX .
For more information on troubleshooting this error code, refer to page 47. 108 Chapter 4 Service Tests and Utilities