Hengstler AC58 SUCOnet Absolute Rotary Encoder (EN)

email: sales@impulseautomation.co.uk web: www.impulseautomation.co.uk TECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet n Compact design n SUCOnet or Hengstler-G1-Protocol n Parameterizable: preset, direction, scaling factor, resolution n PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical 1 at 20°C TECHNICAL DATA electrical Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

Housing diameter 58 mm Shaft diameter 6 mm / 10 mm (Solid shaft) 10 mm / 12 mm (Hubshaft) Flange (Mounting of housing) Synchro flange, Clamping flange, Tether, Square flange Protection class shaft input (EN 60529) IP64 Protection class housing (EN 60529) IP64 Shaft load axial / radial 40 N / 60 N Max. speed max. 6000 rpm (continuous), max. 12 000 rpm (short term) Starting torque typ. 1 ≤ 0.1 Nm Vibration resistance (DIN EN 60068-2-6) 100 m/s² Shock resistance (DIN EN 60068-2-27) 1000 m/s² Operating temperature -10 °C ... +60 °C Storage temperature -25 °C ... +85 °C Material shaft Stainless Steel Material housing Aluminum Weight approx.

260 g (ST) / 310 g (MT) Connection Cable, axial or radial Supply voltage DC 10-30 V Max. current w/o load 200 mA Resolution singleturn 10 - 13 Bit Resolution multiturn 12 Bit Output code Binary Drives RS485 Linearity ± ½ LSB (± 1 LSB for resolution 13 and 25 Bit) Profile/ protocol SUCOnet-K1 or Hengstler-G1 Programmable Resolution, Direction Address switch set via DIP switches Bus termination resistor set via DIP switches Doc No: AE0009 Rev: 001 Impulse Automation Limited United Kingdom Company Registration 665193 Page 2009-12-15 12:07:08 1

Стр. 1

Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. TECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet DIMENSIONED DRAWINGS Synchro flange "S" Connection M23 (Conin) Connection cable Interface: BiSS, SSI, ST-Parallel Interface: MT-Parallel (only with cable), F axial radial Value in brackets alternative at SSI Synchro flange "S" Connection M23 (Conin) Connection cable Interface: BiSS, SSI, ST-Parallel Interface:

MT-Parallel (only with cable), F axial radial Value in brackets alternative at SSI Cable bending radius R for flexible installation ≥ 15 x cable diameter Cable bending radius R for fixed installation ≥ 7.5 x cable diameter Cable Ø d BiSS/SSI/SSI-P: 7,1 +1,2 ieldbus, SSI-P Cable Ø d ST-P: 7,8 +0,9 Cable Ø d MT-P: 9,3 +1,3 Cable Ø d Fieldbus: 7,1 +1,2 Dimensions in mm Doc No: AE0009 Rev: 001 Impulse Automation Limited United Kingdom Company Registration 665193 Page 2009-12-15 12:07:08 2

Стр. 2

Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. TECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet DIMENSIONED DRAWINGS (continued) Clamping flange "K" Connection M23 (Conin) Connection cable Interface: BiSS, SSI, ST-Parallel Interface: MT-Parallel (only with cable), F axial radial alternative Clamping flange "K" Connection M23 (Conin) Connection cable Interface: BiSS, SSI, ST-Parallel Interface:

MT-Parallel (only with cable), F axial radial alternative Value in brackets alternative at SSI Cable bending radius R for flexible installation ≥ 15 x cable diameter Cable bending radius R for fixed installation ≥ 7.5 x cable diameter ieldbus, SSI-P Cable Ø d BiSS/SSI/SSI-P: 7,1 +1,2 Cable Ø d ST-P: 7,8 +0,9 Cable Ø d MT-P: 9,3 +1,3 Cable Ø d Fieldbus: 7,1 +1,2 Dimensions in mm Doc No: AE0009 Rev: 001 Impulse Automation Limited United Kingdom Company Registration 665193 Page 2009-12-15 12:07:08 3

Стр. 3

Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. TECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet DIMENSIONED DRAWINGS (continued) Hollow shaft "F" Dim. 9,52 Hollow shaft Ø A 10 +0.012 12 +0.012 +0.012 Connecting shaft Ø C 10 g7 12 g7 9,52 g Clamping ring Ø B 18 20 18 L min 15 18 15 L max 20 20 20 Shaft code "2" "7" "6" L = Inside length of connection shaft Hollow shaft "F" Dim.

Unit Hollow shaft Ø A 10 +0.012 12 +0.012 9,52 +0.012 12,7 +0.012 mm Connecting shaft Ø C 10 g7 12 g7 9,52 g 7 12,7 g7 mm Clamping ring Ø B 18 20 18 22 mm L min 15 18 15 18 mm L max 20 20 20 20 mm Shaft code "2" "7" "6" "E" L = Inside length of connection shaft Doc No: AE0009 Rev: 001 Impulse Automation Limited United Kingdom Company Registration 665193 Page 2009-12-15 12:07:08 4

Стр. 4