Install the memory DIMM CAUTION: ESD sensitive component. Turn the product off. Disconnect the power cord and interface cables. Before proceeding, remove the following components: ● Formatter cover. See Formatter cover and formatter cage on page 71 . 1. Open the formatter cage door. 2. Remove the DIMM from the antistatic packadge. 3. Hold the DIMM by the edges, and align the notches on the DIMM with the DIMM slot. (Check that the locks on each side of the DIMM slot are open.) Figure 2-23 Install the memory DIMM (1 of 2) 4. Press the DIMM straight into the slot, and press firmly. Make sure the locks on each side of the DIMM snap into place.
Figure 2-24 Install the memory DIMM (2 of 2) ENWW Customer replaceable units (CRUs) 81