4) According to the battery capacity value, press > > button to adjust the battery capacity value, as shown in the figure. Set Bap Cap 54 AH 5) Adjust the reference standard value of battery test and press the button to start the test. 6) When the test is completed, and the display area will display the test results. RESULT GOOD 12.87 V 588 CCA 100% 4.75 mΩ SOH 100 % Exact Test 1) Connect the red test clamp to the battery positive pole, connect the black test clamp to the battery negative pole. Attention must be made to good contact so as not to affect test results. 2) Press > > button to select the battery startup ability test item and press to enter the selection, as follows:
Select Items 1. Start Ability 2. Starting Load 3) According to the nameplate on the battery, press > > button to select the quick test or exact test. Select Exact Test here and press to proceed to the next step. HT2018B(C) Battery System Tester 5