Quick Test Exact Test 4) According to the battery standard and press > > button to choose the battery type. If the battery is JIS standard, select CCA (SAE) as the test standard after consulting the table and comparing CCA. After choose the battery type, now press to enter the selection, as follows: Select Bat Type CCA IEC EN DIN JIS *** 5) According to the standard value expressed on the battery, pressing > > button to adjust the battery specification, and long press > > button to realize the numerical adjustment. As follows: Select Bat Spec 500 CCA 6) Adjust the reference standard value of battery test and press the button to start the test.
7) When the test is completed, and the display area will display the test results. RESULT GOOD 12.87 V 588 CCA 100% 4.75 mΩ SOH 100 % 8) Now press the middle button to enter the print test report interface (refer to Section 5.6), press the button will return to step (4). Note: only HT2018C has Bluetooth printing function. HT2018B(C) Battery System Tester 6