Руководство по эксплуатации Kuhnke Pneumatic Flip-Flop Valve (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk Pneumatic Flip-Flop Valve 5/2 Way Pneumatically Controlled Flip-Flop Valve Technical information Pressure range: Control pressure: Temperature range: Housing: Seals: Lubricant: Operating medium: 2.5-10 bar 0-10 bar -15˚C...+50˚C Die-cast and lacquered zinc alloy NBR Not required 5 micron fi ltered, lubricated or non-lubricated compressed air Other information The flip-flop valve provides a 5/2 way switched output from a pilot pulse signal of at least 300ms. When a pilot pulse is applied to the control port, the 5/2 way valve position changes and maintained until the next pilot pulse signal is applied.

The control pilot signal must be greater than 50% of the switched line pressure. Dimensional drawings 50 106 4,5 30 28 Document No: D1013 Revision 2 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. Description Orifi ce Pilot Port Ports Order code 5/2 way pulsed maintained position 8mm G1/8 G1/4 76.083.89.42 40 58 10 G1/4 107 117

Стр. 1