Kuhnke 76.083.90.00 Pneumatic Oscillator Valve (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk Pneumatic Oscillator Valve 5/2 Way Electrically Controlled Oscillating Valve Technical information Pressure range: 2.5-10 bar Temperature range: -15˚C...+50˚C Housing: Die-cast and lacquered zinc alloy Seals: NBR Lubricant: Not required Earthing Contact: Part of the standard device. Operating medium: 5 micron fi ltered, lubricated or non-lubricated compressed air Other information The oscillator valve provides a continuous 5/2 way switched output function when an electrical signal is applied to the coil. Removal of power to the coil returns the valve to its start position.

Speed is dependant upon the connected volume and line pressure which can be controlled by the addition of flow control valves for example on cylinder ports. The typical speed is 16 cycles per minute. Order coils and connecting plugs separately, see data sheet M1002. Dimensional drawings 62 M5 Document No: C1016 Revision 2 50 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

Description Orifi ce Ports Order code 5/2 way oscillator valve 6mm G1/8 76.083.90.00 54 G1/8 4 2 40 5 1 3 171,5

Стр. 1