Руководство по эксплуатации Kuhnke H09 Linear Solenoid (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk H09 Series Linear Solenoid Push and Pull Type 1) Other voltages are available up to 24 V DC Weight: Complete solenoid: 6.3 g Armature: 2 g Standard: Voltage: 24 V DC Flying leads: 5 cm Insulation class: E (max. permissible temperature = 120 ° C) H09 - F 24 V DC 100%ED Long life expectancy through plastic bobbin armature bearing. 2) If solenoid is mounted directly onto a flat metal surface of at least 45 cm 2 , the duty cycle can be extended up to 1.3 x nominal rating 2,5 %ED Document LNSH09/12 Revision 00 2 2 F/N 5 1 10 0,5 Force vs.

Stroke diagram F = f (s) 25 Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature 0,1 50 100 stroke s = 0 corresponds to armature in fully home position 0 0 0,25 0,5 0,75 1,0 1,25 1,5 1,75 2,0 s/mm Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

H 09 – F – 24 V DC 100 % ED Ord er specifications H Line ar solenoid 09 Size s Coil terminals F Flying leads (5 cm standard length) 24 No minal voltage (standard voltage)1) 100 % ED Per m. duty cycle under air cooled conditions (LK) 100 50 25 9 5 % Perm. duty cycle (ED)2) 1,6 3,1 5,7 14,5 24,5 W Nominal coil power Pn

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk H09 Series Linear Solenoid Push and Pull Type 3,3 7 6,5 9,3 50 + 15 4,8 ± 0,2 10,5 1,9 4,2 ± 0,2 8 6 M2 2 4 Si-Ri 1,2 DIN6799 Document LNSH09/22 Revision 00 2 Dimensions given with armature in fully home position Direction of stroke Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. Series H 09 combi type solenoid M2 1,5 3 3 19,8 3 3

Стр. 2