Kuhnke H24 Linear Solenoid Datasheet (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk H24 Series Linear Solenoid Push and/or Pull Type 2) Series H 2486-R-... solenoids are available with return spring F (0 mm) = 1.5 N and F (8 mm) = 0.3 N 3) Other DC voltages are available on request . Weight: Complete solenoid: appr. 85 g Armature: appr. 25 g Standard: Voltage: 24 V DC Flying leads: 10 cm Insulation class: B (max. permissible temperature = 130 ° C) H2446-F 24 V DC 100% ED 4) If solenoid is mounted directly onto a flat metal surface of at least 60 cm 2 , the duty cycle can be extended up to 1.3 x nominal rating Document LNSH24/12 Revision 00 3 50 %ED 20 10 5 Force vs.

Stroke diagram F = f (s) F/N 5 15 Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature 2 28 0,4 0,6 1 45 stroke s = 0 corresponds to armature in fully home position 0,3 0,2 100 Force vs. stroke characteristics measured without return spring 0 2 4 6 8 s/mm Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

H 24 06 – F – 24 V DC 100 % ED Ord er specifications H Line ar solenoid 24 Size s Desi gn type 06 Pull type solenoid 46 Thrust type solenoid 86-R Combi type solenoid with return spring2) Coil terminals F Flying leads (10 cm standard length) 24 No minal voltage (standard voltage)3) 100 % ED Per m. duty cycle under air cooled conditions (LK) 100 45 28 15 5 % Perm. duty cycle (ED)4) 6 13,8 21 40 102 W Nominal coil power Pn 23 9 ms Actuation time (ED)

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk H24 Series Linear Solenoid Push and/or Pull Type Ш10 Dimensions given with armature in fully home position Direction of stroke 4 8 24 Ш3 66,5 Dimensions given with armature in fully home position Direction of stroke 8 24 Ш6,5 77,5 Document LNSH24/22 Revision 00 3 Ш10 Dimensions given with armature in fully home position Direction of stroke 4 8 24 Ш3 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. H2406 pull type solenoid 9 3 40 25 20 M3 14 ≤0,5 Ø6,5 H2446 thrust type solenoid 40 25,5 0,3 10+1 25 20 M3 ≤0,5 Ø10 H2486-R combi type solenoid with return spring 9 3 40 25,5 0,3 10+1 M3 10+1 25 20 M3 14 ≤0,5 D Ø6,5

Стр. 2